sunandaC

New member
BISLERI

Visit Analysis:
A)

1. Research & Development Dept:
The R & D Dept of this company starts planning 6 months in advance. The R & D Dept conducts market survey for 2-3 months for modification of the shape of the bottle.

2. Market Survey:
The different design is shown to a special group of customers & dealers and according to the demand, the design is chosen by the company.

B)

PRODUCTION CYCLE:

There are mainly three stages in the production cycle:

1.Disinfection: In this stage, water is collected from bore wells which are then disinfected using chemicals.
2.Filterization: In this stage, water is passed through different filters to kill the bacteria present in it. Then, the water is passed on to the next level for filling up.
3. Filling: In this stage, the bottles are ozonated and then the water is filled in the bottles.

C)

PRODUCTION PROCESS:

1. Quality Management of Water:

Raw water which is collected from the wells is stored in a tank which has a capacity to store 1 lakh liters of water. Then the water is chlorinated to kill the bacteria present in the water which is passed through 20 micro arcal filters. Then it is passed through carbon filter which is used for removing activated carbon and odor and also acts as chlorine remover. Then it is passed through 10-micron filter. Then it goes through REVERSE AUSMOSES PLANT, which contains semi-pomitable membrane which removes dissolved solids and bacteria of size 0.001 micron. It is passed through 1 micron and 0.5-micron filters. T hen the water gets ozonated and passed through SS 316 MACHINE. Water is stored in 10000 liter tanks.

2. Blowing of Bottles:

The bottles in this factory are given the desired shape by the use of blowing machines. These machines blow at a temperature of 300 degrees Celsius. The machine used for the blowing purpose is known as the AOKI MACHINE. This machine has a blowing capacity of 10 bottles per minute.

3. Filling of Bottles:

There are three types of filling machines, which are used for the filling purpose. The different sizes of bottles that are filed are of 500ml, 1liter, 1.2liters and 2liters respectively. First the bottle gets ozonized when it is passed through JET MACHINES. In this the bottle gets integrated and disintegrated, it gets rinsed, and then the water is filled into the bottles.

4. Filling of Jars:

The different sizes of jars are 5liters, 10liters and 20liters. The jars are cleaned manually by soap and water. Then it is cleaned with sodium hypo-chloride and virosin, which are disinfectors. When jars are passed through washing machine first it is rinsed with hot water, then disinfected and then it is ozonated. Then jars are passed on to jar fillers where it gets filled and the packing of sealed jars into boxes is done manually.

5. Laboratory Testing:

Every hour samples of water that are filled in to the bottles are taken and various testing is done. First it is checked for odor if any, presence of alkanity, chlorine and calcium. The water is also checked in machines like PH METER, TDS(TOTAL DISSLOVE SOLIDS) METER, NEPHLOMETER, SPECTROPHOTOMETER AND MEASURING OF TUBILITY. They also do aerobic microbial count and pathogen testing.


FURURE PLANS: -

Bisleri have been the market leaders in India as far as mineral waters are concerned. Every time their bottle and waters are checked and rechecked for its purity. Their main aim is to stay ahead of the main rivals i.e. Pepsi and Coca Cola. Their raw material comes from reliance industries limited who are their main suppliers of the raw material i.e. PET.
 

tanujjadhav

New member
good
it was very helpfull and it was of great help in doing my report and wat to say this report has supported me alot
 
BISLERI

Visit Analysis:
A)

1. Research & Development Dept:
The R & D Dept of this company starts planning 6 months in advance. The R & D Dept conducts market survey for 2-3 months for modification of the shape of the bottle.

2. Market Survey:
The different design is shown to a special group of customers & dealers and according to the demand, the design is chosen by the company.

B)

PRODUCTION CYCLE:

There are mainly three stages in the production cycle:

1.Disinfection: In this stage, water is collected from bore wells which are then disinfected using chemicals.
2.Filterization: In this stage, water is passed through different filters to kill the bacteria present in it. Then, the water is passed on to the next level for filling up.
3. Filling: In this stage, the bottles are ozonated and then the water is filled in the bottles.

C)

PRODUCTION PROCESS:

1. Quality Management of Water:

Raw water which is collected from the wells is stored in a tank which has a capacity to store 1 lakh liters of water. Then the water is chlorinated to kill the bacteria present in the water which is passed through 20 micro arcal filters. Then it is passed through carbon filter which is used for removing activated carbon and odor and also acts as chlorine remover. Then it is passed through 10-micron filter. Then it goes through REVERSE AUSMOSES PLANT, which contains semi-pomitable membrane which removes dissolved solids and bacteria of size 0.001 micron. It is passed through 1 micron and 0.5-micron filters. T hen the water gets ozonated and passed through SS 316 MACHINE. Water is stored in 10000 liter tanks.

2. Blowing of Bottles:

The bottles in this factory are given the desired shape by the use of blowing machines. These machines blow at a temperature of 300 degrees Celsius. The machine used for the blowing purpose is known as the AOKI MACHINE. This machine has a blowing capacity of 10 bottles per minute.

3. Filling of Bottles:

There are three types of filling machines, which are used for the filling purpose. The different sizes of bottles that are filed are of 500ml, 1liter, 1.2liters and 2liters respectively. First the bottle gets ozonized when it is passed through JET MACHINES. In this the bottle gets integrated and disintegrated, it gets rinsed, and then the water is filled into the bottles.

4. Filling of Jars:

The different sizes of jars are 5liters, 10liters and 20liters. The jars are cleaned manually by soap and water. Then it is cleaned with sodium hypo-chloride and virosin, which are disinfectors. When jars are passed through washing machine first it is rinsed with hot water, then disinfected and then it is ozonated. Then jars are passed on to jar fillers where it gets filled and the packing of sealed jars into boxes is done manually.

5. Laboratory Testing:

Every hour samples of water that are filled in to the bottles are taken and various testing is done. First it is checked for odor if any, presence of alkanity, chlorine and calcium. The water is also checked in machines like PH METER, TDS(TOTAL DISSLOVE SOLIDS) METER, NEPHLOMETER, SPECTROPHOTOMETER AND MEASURING OF TUBILITY. They also do aerobic microbial count and pathogen testing.


FURURE PLANS: -

Bisleri have been the market leaders in India as far as mineral waters are concerned. Every time their bottle and waters are checked and rechecked for its purity. Their main aim is to stay ahead of the main rivals i.e. Pepsi and Coca Cola. Their raw material comes from reliance industries limited who are their main suppliers of the raw material i.e. PET.

Nice work sunanda! It was really impressive and i should appreciate your effort. I think Bisleri was the first company which introduced the mineral water in bottles in India. For more details you can check my presentation.
 

Attachments

  • Production Management at Bisleri.pdf
    347.6 KB · Views: 5
Top