sunandaC

New member
BUISNESS UNIT PROFILE



• Steel Plant

Our company, Mukunda Ltd is a leading manufacture of special and alloy steel mainly to the automobile and auto component industry and a leader in the manufacture of high grade stainless steel in India. We produce more than 400 grades of specially engineered steel to suit stringent customer requirement in sizes ranging from 3 mm to 150 mm in the form of bars, wire rods, wires and bright bars.

Our Stainless Steel Melt Shop at Kalwe mill produces stainless steel using shredded scrap melted in an ultra high power furnace. The molten steel is further refined in a converter, Ladle refining, VD / VOD and finally cast through a continuous casting machine with a radius of 10.5 meters.

Our Alloy Steel Melt Shop at Hospet produces alloy steel by melting iron ore in a mini blast furnace and converting the molten metal into steel through an energy optimizing furnace and further refining it through the ladle refining and VD stations. It is finally cast through a continuous bloom caster of 10 – 8 meters radius.

Both the stainless steel and alloy steel billets are further rolled and finished at our facility in Kalwe. We have a state of the art wire rod cum bar mill that can roll wire rods, bars, wires in sizes ranging from 3mm to 150 mm.

We offer our customers a wide range of finishing options form spheroid’s annealed to machine straightened, hardened or tempered .our customers are the leaders in their fields and have been with us for more than two decades.

We have entered into a joint venture with the worlds largest wire manufacture – Bekaert Industries t5o manufacture stainless steel wires. This joint venture company is being setup in Lonand in Satara.


Seventy five percent of our company’s steel feeds the automobile and the auto component industry. Our steel is used for the manufacturing of transmission components, engine components, steering components, chassis components, drive train, bearing etc...the stain less steel produced by our company is used in the manufacturing of chemical paint equipment , forging & stamping , automobile components , electrical equipment , welding electrodes , surgical instruments , flanges , fine wires, cutlery , utensil , etc …
 

bhautik.kawa

New member
BUISNESS UNIT PROFILE



• Steel Plant

Our company, Mukunda Ltd is a leading manufacture of special and alloy steel mainly to the automobile and auto component industry and a leader in the manufacture of high grade stainless steel in India. We produce more than 400 grades of specially engineered steel to suit stringent customer requirement in sizes ranging from 3 mm to 150 mm in the form of bars, wire rods, wires and bright bars.

Our Stainless Steel Melt Shop at Kalwe mill produces stainless steel using shredded scrap melted in an ultra high power furnace. The molten steel is further refined in a converter, Ladle refining, VD / VOD and finally cast through a continuous casting machine with a radius of 10.5 meters.

Our Alloy Steel Melt Shop at Hospet produces alloy steel by melting iron ore in a mini blast furnace and converting the molten metal into steel through an energy optimizing furnace and further refining it through the ladle refining and VD stations. It is finally cast through a continuous bloom caster of 10 – 8 meters radius.

Both the stainless steel and alloy steel billets are further rolled and finished at our facility in Kalwe. We have a state of the art wire rod cum bar mill that can roll wire rods, bars, wires in sizes ranging from 3mm to 150 mm.

We offer our customers a wide range of finishing options form spheroid’s annealed to machine straightened, hardened or tempered .our customers are the leaders in their fields and have been with us for more than two decades.

We have entered into a joint venture with the worlds largest wire manufacture – Bekaert Industries t5o manufacture stainless steel wires. This joint venture company is being setup in Lonand in Satara.


Seventy five percent of our company’s steel feeds the automobile and the auto component industry. Our steel is used for the manufacturing of transmission components, engine components, steering components, chassis components, drive train, bearing etc...the stain less steel produced by our company is used in the manufacturing of chemical paint equipment , forging & stamping , automobile components , electrical equipment , welding electrodes , surgical instruments , flanges , fine wires, cutlery , utensil , etc …

Hey Sunanda,

thanks for Article on BUISNESS UNIT PROFILE Mukunda Ltd, such a nice topic you choose and it is really going to help many people.

Thank you!
 
Top